Xi'an Shelok Instrument Co.,Ltd

WhatsApp:8617391772603 WeChat:17391772603

WhatsApp:8617391772603 WeChat:17391772603

Shelok Coriolis Mass Flow Meter

Introduction

The meter is designed and produced according to world’s latest Coriolis technology with better

appearance, stability and accuracy to measure mass flow rate of a fluid traveling through a tube,

widely applied to alternative energy, oil & gas, chemical, food & beverage, industrial energy,

marine, power, pulp & paper, water & wastewater industries, etc.

 

Operating Principle

Mass flow meter measures the mass based on Coriolis effort. The operating principle involves

inducing a vibration of the tube through which the fluid passes. The vibration, though not

completely circular, provides the rotating reference frame that gives rise to the Coriolis effect.

While specific methods vary according to the design of the flow meter, sensors monitor and

analyze changes in frequency, phase shift & amplitude of the vibrating flow tubes. The changes

observed represent the mass flow rate and density of the fluid.

Feature

The measurement is not affected by flow density, viscosity, temperature, pressure;

Low requirements for the straight pipe section, because there is nothing inside to hinder the flow;

Low power consumption; Stable zero position; Better accuracy;

The instrument is an ARM system with 3 calculators to calculate density, temperature and mass flow rate;

The transmitter is assembled by surface mount technology and has self-test function.

ATEX certification (excluding transmitter F210). A certificate. TPS number

Specific conditions of use

1) Warning – Do not turn on the transmitter when powered on.

2) Precautions should be taken during equipment installation to ensure the environment

The temperature of the transmitter conforms to the marked temperature range and takes into account

Process fluid influence.

3) The cable inlet of the transmitter must be connected through a suitable cable inlet

The equipment is covered by a separate ATEX/IECEx Certificate of Conformity (Ex d)

Explosion-proof performance certified with minimum IP67.

4) The unused entrance hole of the transmitter must be masked by a suitable blanking method

Elements are also covered by a separate ATEX/IECEx Certificate of Conformity (Ex d)

Explosion-proof performance certified with minimum IP67.

5) The transmitter external grounding device should be connected reliably.

6) For temperature classes T2 and T1, power should be provided with a suitable cable and cable seal

Temperature 100°C.

Reviews

There are no reviews yet.

Be the first to review “Shelok Coriolis Mass Flow Meter”

Your email address will not be published. Required fields are marked *

Shelok Coriolis Mass Flow Meter

Introduction

The meter is designed and produced according to world’s latest Coriolis technology with better

appearance, stability and accuracy to measure mass flow rate of a fluid traveling through a tube,

widely applied to alternative energy, oil & gas, chemical, food & beverage, industrial energy,

marine, power, pulp & paper, water & wastewater industries, etc.

 

Operating Principle

Mass flow meter measures the mass based on Coriolis effort. The operating principle involves

inducing a vibration of the tube through which the fluid passes. The vibration, though not

completely circular, provides the rotating reference frame that gives rise to the Coriolis effect.

While specific methods vary according to the design of the flow meter, sensors monitor and

analyze changes in frequency, phase shift & amplitude of the vibrating flow tubes. The changes

observed represent the mass flow rate and density of the fluid.

Feature

The measurement is not affected by flow density, viscosity, temperature, pressure;

Low requirements for the straight pipe section, because there is nothing inside to hinder the flow;

Low power consumption; Stable zero position; Better accuracy;

The instrument is an ARM system with 3 calculators to calculate density, temperature and mass flow rate;

The transmitter is assembled by surface mount technology and has self-test function.

ATEX certification (excluding transmitter F210). A certificate. TPS number

Specific conditions of use

1) Warning – Do not turn on the transmitter when powered on.

2) Precautions should be taken during equipment installation to ensure the environment

The temperature of the transmitter conforms to the marked temperature range and takes into account

Process fluid influence.

3) The cable inlet of the transmitter must be connected through a suitable cable inlet

The equipment is covered by a separate ATEX/IECEx Certificate of Conformity (Ex d)

Explosion-proof performance certified with minimum IP67.

4) The unused entrance hole of the transmitter must be masked by a suitable blanking method

Elements are also covered by a separate ATEX/IECEx Certificate of Conformity (Ex d)

Explosion-proof performance certified with minimum IP67.

5) The transmitter external grounding device should be connected reliably.

6) For temperature classes T2 and T1, power should be provided with a suitable cable and cable seal

Temperature 100°C.

Reviews

There are no reviews yet.

Be the first to review “Shelok Coriolis Mass Flow Meter”

Your email address will not be published. Required fields are marked *

Title

Go to Top