Xi'an Shelok Instrument Co.,Ltd

WhatsApp:8617391772603 WeChat:17391772603

WhatsApp:8617391772603 WeChat:17391772603

Shelok Digital Flow Meters

Introduction

ZFG series integrated electromagnetic flow meter is a
combination of ZFG electromagnetic flow meter sensor and ZFH
series signal converter. The signal converter has IP67
protection requirements.
ZFG integrated electromagnetic flow meter is mainly used to
measure the volume flow of various acids, salt solutions, pulp,
mud and other conductive liquids, or liquid-solid two-phase
media. It is widely used in chemical industry, mining and
metallurgy, water supply and drainage, sewage treatment, food,
paper, sugar, port dredging and other departments.
This flow meter can be matched with display, recording
instrument, totalizator or regulator to detect, accumulate.

Working principle

The measuring principle of electromagnetic flow meter is based on Faraday’s law of electromagnetic induction. The

sensor is mainly composed of a measuring tube with an insulating lining, a pair of electrodes installed by inserting

the measuring tube wall, a pair of coils and an iron core to generate a working magnetic field. When a conductive

fluid flows through the measuring tube of the sensor, a voltage signal proportional to the average flow rate of the

fluid will be induced on the electrode. The signal is operationally amplified and processed to achieve various display

functions.

 

Features

  • Measurements are not affected by fluid density, viscosity, temperature, pressure and conductivity.
  • No obstacles in the measuring tube, no pressure loss, low requirements for straight pipe section.
  • The LCD backlight type converter can be easily displayed and read in the sun or in a dark room.
  • In harsh environments, parameters can be set via infrared touch butions without opening the cover of the convert

er (need to be customized).

  • Flow meter with bidirectional measurement system, built-in three totalizers: positive total, reverse total and total

difference.

  • It has various forms of output: current 4-20mA, pulse, frequency, rs-485, HART.
  • The converter has self-diagnosis alarm output, no-load detection alarm output, flow upper and lower limit alarm,

batch control (need to be customized) and other alarm output functions.

  • Not only for general processes, but also for the measurement of ore pulp, mud, coal slurry, paper pulp and paste

liquid.

  • High-pressure electromagnetic flow sensor with PFA lining technology, resistant to high pressure and negative

pressure, especially suitable for petroleum, chemical and other industries.

  • Explosion-proof instruments can be used in corresponding explosion-proof places

Reviews

There are no reviews yet.

Be the first to review “Shelok Digital Flow Meters”

Your email address will not be published. Required fields are marked *

Shelok Digital Flow Meters

Introduction

ZFG series integrated electromagnetic flow meter is a
combination of ZFG electromagnetic flow meter sensor and ZFH
series signal converter. The signal converter has IP67
protection requirements.
ZFG integrated electromagnetic flow meter is mainly used to
measure the volume flow of various acids, salt solutions, pulp,
mud and other conductive liquids, or liquid-solid two-phase
media. It is widely used in chemical industry, mining and
metallurgy, water supply and drainage, sewage treatment, food,
paper, sugar, port dredging and other departments.
This flow meter can be matched with display, recording
instrument, totalizator or regulator to detect, accumulate.

Working principle

The measuring principle of electromagnetic flow meter is based on Faraday’s law of electromagnetic induction. The

sensor is mainly composed of a measuring tube with an insulating lining, a pair of electrodes installed by inserting

the measuring tube wall, a pair of coils and an iron core to generate a working magnetic field. When a conductive

fluid flows through the measuring tube of the sensor, a voltage signal proportional to the average flow rate of the

fluid will be induced on the electrode. The signal is operationally amplified and processed to achieve various display

functions.

 

Features

  • Measurements are not affected by fluid density, viscosity, temperature, pressure and conductivity.
  • No obstacles in the measuring tube, no pressure loss, low requirements for straight pipe section.
  • The LCD backlight type converter can be easily displayed and read in the sun or in a dark room.
  • In harsh environments, parameters can be set via infrared touch butions without opening the cover of the convert

er (need to be customized).

  • Flow meter with bidirectional measurement system, built-in three totalizers: positive total, reverse total and total

difference.

  • It has various forms of output: current 4-20mA, pulse, frequency, rs-485, HART.
  • The converter has self-diagnosis alarm output, no-load detection alarm output, flow upper and lower limit alarm,

batch control (need to be customized) and other alarm output functions.

  • Not only for general processes, but also for the measurement of ore pulp, mud, coal slurry, paper pulp and paste

liquid.

  • High-pressure electromagnetic flow sensor with PFA lining technology, resistant to high pressure and negative

pressure, especially suitable for petroleum, chemical and other industries.

  • Explosion-proof instruments can be used in corresponding explosion-proof places

Reviews

There are no reviews yet.

Be the first to review “Shelok Digital Flow Meters”

Your email address will not be published. Required fields are marked *

Title

Go to Top